|
View previous topic :: View next topic
|
| Author |
Message |
Alfred Scott
Joined: 15 Apr 2004
Posts: 633
Location: Richmond, VA
|
 Posted: Fri Jun 20, 2008 2:24 pm Post subject: SketchTools Problem |
    |
|
If you're using SketchTools and a Wacom tablet, chances are it has not been working for pressure and tilt lately. Matt Arnold ran into this problem.
Turns out the programmer at Wacom made an obscure mistake. It's now fixed in the 6.0.8-2 Wacom Tablet Driver, which has just recently been released.
Go to Wacom.com, then click on the region for the Americas if that's where you are. Then go to downloads, pick your tablet, then Mac OS X and you should find yourself looking at the 6.0.8-2 driver. I ended up at http://www.wacom.com/productsupport/select.cfm
Alfred |
|
| Back to top |
|
 |
patrickm
Joined: 13 Apr 2004
Posts: 314
Location: santa barbara, ca
|
| Posted: Sun Jun 22, 2008 12:27 pm Post subject: |
|
|
Speaking of Wacom tablets, now that I have my 30" monitor, I am thinking getting one might be my next toy purchase. Does anyone have a recommendation for size/model?
thanks,
patrick |
|
| Back to top |
|
|
Rob C
Joined: 14 Apr 2004
Posts: 531
Location: Southern Connecticut
|
| Posted: Mon Jun 23, 2008 7:54 pm Post subject: |
|
|
I use the 6x8 tablet with a 15" Powerbook and 20" display in dual display mode. Movement is rapid with that mapping, but I'm used to it. You might want to consider the wide screen model, 6x12 or something like that.
_________________
Rob
www.robertcoolidge.com |
|
| Back to top |
|
|
|
blogger
del.icio.us
digg
slashdot
