ArchitectureWeek DesignCommunity Forum Index » PowerCADD Discussion

View previous topic :: View next topic
Author	Message
paulprd Joined: 12 Jan 2006 Posts: 52	Posted: Mon Oct 29, 2007 10:02 am    Post subject: Re: No BIM, please! Rick C wrote: I'm on several POA Architectural Review Boards and I've watched local architects struggle with their BIM software. It seems like you can't get a drawing that looks complete until ALL data is entered. So, right up until their work is finished their drawings are rough and unfinished to the point of being inadequate to show the design intent. Hi all, Yea spot on! Bim is great for knocking out the production stuff, but only after a lot work, as you say getting to this point can be struggle. Thats really why there is a place for 2D and PowerCADD, flexibility and ease of use from pitching to production. With a bolt on (when we get there) very easy to use 3D visualiser, cooking!
Back to top	share:   blogger     del.icio.us     digg     slashdot
M-Rick Joined: 11 Feb 2006 Posts: 95	Posted: Sat Jul 19, 2008 5:24 pm    Post subject: what about this project ?? We don't have any news anymore ... Is it dead ?
Back to top	share:   blogger     del.icio.us     digg     slashdot
paulprd Joined: 12 Jan 2006 Posts: 52	Posted: Tue Jul 22, 2008 11:27 am    Post subject: Hi all, No very much alive. Just taking us a little longer than we expected. Few pics to show we are getting close. The wire frame style iimage is actual elevations from PC in 2D that in a few seconds we can match to the 3D world. Any paste from PC is then automatically matched and in the correct xyz. You can extrude with these to add details etc. Or use them illustrative style as in this pic. Sorry for the lack of info! Been a little busy doing it Sorry the attachements have reached their limit. Cant post pics on this thread. Will post a few more on a new thread later. Cheers Paul
Back to top	share:   blogger     del.icio.us     digg     slashdot
M-Rick Joined: 11 Feb 2006 Posts: 95	Posted: Tue Jul 22, 2008 12:28 pm    Post subject: use this to post them http://imageshack.us/
Back to top	share:   blogger     del.icio.us     digg     slashdot
paulprd Joined: 12 Jan 2006 Posts: 52	Posted: Tue Aug 05, 2008 8:42 am    Post subject: Sorry for the tardy reply. Been on a weeks vacation. Back to earth now so will post some pics in the next day or so. All the best Paul
Back to top	share:   blogger     del.icio.us     digg     slashdot
paulprd Joined: 12 Jan 2006 Posts: 52	Posted: Tue Aug 19, 2008 8:32 am    Post subject: Hi All, Sorry for the long delay. Rather than post a few bits and bobs decided to tidy up the web site. Its very much a work in progress at the moment so please dont expect everything to work. But the movie tutorials are all working and give a good idea of whats cooking. There is more to come both in terms of features and finishing the site. But there is a fair bit in here to go on with. Thanks and cheers Paul http://www.prdsoftware.co.uk/in2spaceuk
Back to top	share:   blogger     del.icio.us     digg     slashdot
M-Rick Joined: 11 Feb 2006 Posts: 95	Posted: Tue Aug 19, 2008 8:38 am    Post subject: it looks to be excellent this software ! will you release a demo version ? which version of powercadd will be compatible ? is it compatible with Sketchup, 3DS, DXF, DWG ?
Back to top	share:   blogger     del.icio.us     digg     slashdot
patrickm Joined: 13 Apr 2004 Posts: 317 Location: santa barbara, ca	Posted: Tue Aug 19, 2008 10:07 am    Post subject: I just spent the last half hour watching the In2Space tutorials -- can't wait until your software is available. It looks great and would benefit my work! patrick
Back to top	share:   blogger     del.icio.us     digg     slashdot
paulprd Joined: 12 Jan 2006 Posts: 52	Posted: Wed Aug 20, 2008 10:47 am    Post subject: Hi Guys, Thanks for the enouraging comments ! Yes a demo will be available. Will be compatible with 8 back to 2000 possiby earlier. DWG will be the exchange format but maybe not in 1st release but certainly 1.1. So yes compatible with most apps. One of the first features in the 2nd round, maybe the 1st but doubt it. Just working on some mini movies for roof tools and so on. So will post again when they are up and running. Cheers Paul
Back to top	share:   blogger     del.icio.us     digg     slashdot
Matt Joined: 13 Apr 2004 Posts: 355 Location: Sterling, Virginia	Posted: Fri Aug 22, 2008 8:52 am    Post subject: Paul -- Consider adding a link to the website or demo videos to your signature or posts about the software you're working on to make it easier for folks to see what you're doing... Matt
Back to top	share:   blogger     del.icio.us     digg     slashdot
poolvibe Joined: 16 Apr 2004 Posts: 338 Location: My Lair	Posted: Thu Aug 28, 2008 3:29 pm    Post subject: paulprd wrote: Hi Guys, Thanks for the enouraging comments ! Yes a demo will be available. Will be compatible with 8 back to 2000 possiby earlier. DWG will be the exchange format but maybe not in 1st release but certainly 1.1. So yes compatible with most apps. One of the first features in the 2nd round, maybe the 1st but doubt it. Just working on some mini movies for roof tools and so on. So will post again when they are up and running. Cheers Paul WHEN! _________________ www.shouldbefree.net
Back to top	share:   blogger     del.icio.us     digg     slashdot
Display posts from previous: All Posts1 Day7 Days2 Weeks1 Month3 Months6 Months1 Year Oldest FirstNewest First

ArchitectureWeek DesignCommunity Forum Index » PowerCADD Discussion

Page 2 of 2 Goto page Previous  1, 2